Small Parts Booths - SPB 76F-D

Download PDF

Our ducted models are exactly the same specifications as our ductless models, except that ducted SPBs are not movable, and they only have 2 filtration layers (see below). Ducted SPBs are for when you may need to vent your airflow to the outside environment, or when you need unlimited spray applications. Permitting may be required, depending on your area's regulating bodies.

Our Certification

The ETL Listed Mark (shown below) indicates that Marathon Finishing products have been evaluated and tested by Intertek, a Nationally Recognized Testing Laboratory (NRTL) and have been found to meet or exceed all required national safety standards for the US and Canada.

Our Standards

All of our products meet or exceed the following national safety and fire standards:

International Fire Code (IFC)
California Fire Code (CFC)
National Fire Protection Assn. Code 1 (NFPA 1)
National Fire Protection Assn. Code 33 (NFPA 33)
National Fire Protection Assn. Code 70 (NFPA 70)
International Mechanical Code (IMC)
Occupational Safety Hazards Assn. (OSHA)

The SPB 76F-D is unmatched in size, quality, or value anywhere! All of our Small Parts Booths are built with the highest quality and cutting edge engineering methods that undeniably set the benchmark that others cannot match. Our team uses the exact same materials, components, and design techniques that we use when building our larger full size booths. The booth housing is made from 18 gauge steel, CNC precision cut, with holes cut 6" on center, with full, 2" companion flanges.

When you are looking for a small parts booth, there are a few key items you should consider:

Size
The size of your small parts booth should be such that it gives you a comfortable area around the item that you are working with, not just for the ability to move around as you work, but also so that the air flows around the work item properly. We have designed this small parts booth to provide you with the best work environment possible!

CFM
CFM is an abbreviation of 'Cubic Feet per Minute', and is a measure of the volume and rate at which air moves through a given space over time. The larger a space is, the more air (or CFM) must move through that space. The industry standard states that the minimum rate should be 100 CFM.

Filtration
The exhaust filters are meant to catch overspray and remove it from the air stream before the exhaust air leaves the unit. The filters are easy to change. Simply pop them out of their frame, dispose of them (according to applicable regulations), and put the replacement filter in the frame. EASY!

This unit has 2 stage filtration:

1st Stage:
The first stage is a pre-filter, which is a simple fiber sheet, meant to catch the largest aerosolized particulates. The primary benefit of this is to allow this inexpensive filter media to 'load up', rather than having to purchase the rest of the filters more often. Monitor this filter frequently, and change it as soon as it's necessary. Doing this will save you a fair amount of money!

2nd Stage:
This filter is the primary filter, and it is a multi-layer fiber filter designed to remove most of the overspray particulates during spray operations. Heavy loading of this filter will adversely affect the effective operation of this booth, so monitor this filter closely also.

When you are looking for a small parts booth, there are a few key items you should consider:

Size
The size of your small parts booth should be such that it gives you a comfortable area around the item that you are working with, not just for the ability to move around as you work, but also so that the air flows around the work item properly. We have designed this small parts booth to provide you with the best work environment possible!

CFM
CFM is an abbreviation of 'Cubic Feet per Minute', and is a measure of the volume and rate at which air moves through a given space over time. The larger a space is, the more air (or CFM) must move through that space. The industry standard states that the minimum rate should be 100 CFM.

Filtration
The exhaust filters are meant to catch overspray and remove it from the air stream before the exhaust air leaves the unit. The filters are easy to change. Simply pop them out of their frame, dispose of them (according to applicable regulations), and put the replacement filter in the frame. EASY!

This unit has 2 stage filtration:

1st Stage:
The first stage is a pre-filter, which is a simple fiber sheet, meant to catch the largest aerosolized particulates. The primary benefit of this is to allow this inexpensive filter media to 'load up', rather than having to purchase the rest of the filters more often. Monitor this filter frequently, and change it as soon as it's necessary. Doing this will save you a fair amount of money!

2nd Stage:
This filter is the primary filter, and it is a multi-layer fiber filter designed to remove most of the overspray particulates during spray operations. Heavy loading of this filter will adversely affect the effective operation of this booth, so monitor this filter closely also.

When you are looking for a small parts booth, there are a few key items you should consider:

Size
The size of your small parts booth should be such that it gives you a comfortable area around the item that you are working with, not just for the ability to move around as you work, but also so that the air flows around the work item properly. We have designed this small parts booth to provide you with the best work environment possible!

CFM
CFM is an abbreviation of 'Cubic Feet per Minute', and is a measure of the volume and rate at which air moves through a given space over time. The larger a space is, the more air (or CFM) must move through that space. The industry standard states that the minimum rate should be 100 CFM.

Filtration
The exhaust filters are meant to catch overspray and remove it from the air stream before the exhaust air leaves the unit. The filters are easy to change. Simply pop them out of their frame, dispose of them (according to applicable regulations), and put the replacement filter in the frame. EASY!

This unit has 2 stage filtration:

1st Stage:
The first stage is a pre-filter, which is a simple fiber sheet, meant to catch the largest aerosolized particulates. The primary benefit of this is to allow this inexpensive filter media to 'load up', rather than having to purchase the rest of the filters more often. Monitor this filter frequently, and change it as soon as it's necessary. Doing this will save you a fair amount of money!

2nd Stage:
This filter is the primary filter, and it is a multi-layer fiber filter designed to remove most of the overspray particulates during spray operations. Heavy loading of this filter will adversely affect the effective operation of this booth, so monitor this filter closely also.

Air Flow
Ambient, or surrounding air, is drawn in directly through the front end of the booth. If there is dust or other particulates in the surrounding air, these will be drawn into the booth, and may contaminate the work area, so be aware of the air quality in your facility.

Exhaust
Once the air has traveled through the booth, it has been gone through 2 stages of filters (described at left) and is directed out the top of the booth, and outside the facility.

Call us to discuss the specific details of your finishing processes.

Call us at 310-791-5601 and tell us which of these options you are interested in.
You’ll see why we say Marathon Finishing is the Benchmark for spray painting solutions!