Industrial Full Down Draft Spray Paint Booths
Marathon’s wide range of Full Down Draft Spray Booths for automotive refinishing are an impressive selection of “Top of Line” products designed to meet every finishing challenge, and are the preferred booth of paint professionals in a wide array of industries. These “Premium” spray booths are available in standard sizes and configurations, or we can custom design a system to fit any environment and provide the highest quality finishing.
Engineered with efficiency and productivity as our focus, this spray paint booth style is an excellent investment in the future success of your business. This booth requires a pit in the floor or must sit on a raised basement, and can be ordered with a Spray & Cure heater or without.
Marathon Spray Paint Booths are ETL listed and comply with all applicable quality and safety standards.
Heated Full Down Draft Spray Paint Booth with Quad Doors
Heated Full Down Draft Spray Paint Booth with Roll Up Doors
Air Flow – Full Down Draft Spray Paint Booth
Intake, Heated Booth:
Outside air is filtered twice, once as it enters in through the air make up unit located next to the spray booth, and again as it passes through the intake plenum ceiling filters. In this example this booth is equipped with a Spray & Cure heating unit.
Intake, Non Heated Booth:
The outside air is filtered once, through the ceiling intake filters before entering the work area.
Exhaust, Both Spray Booth Types:
The filtered air travels vertically downward to the bottom of the booth (down drafta). Finally, the air is filtered of overspray and particulates by the exhaust filters before exiting the booth. Marathon uses standard size intake and exhaust filter media, readily available from most paint and refinishing suppliers, or directly from Marathon.
Tap Image to Enlarge
Did you Know?
The ETL Listing (certification) is
confirmation that every aspect of
our construction meets or exceeds the
build and safety code standards established by
NFPA 33. This is important, as your Fire Inspector will require proof of compliance before approval.
Did you Know?
The ETL Listing (certification) is your confirmation that every aspect of our construction meets or exceeds the build and safety code standards established by NFPA 33. This is important, as your Fire Inspector will require proof of compliance before approval.
Tap Chart to Enlarge
We Also Build Custom Sizes and Configurations, Just Ask!
Available Options for This Booth Type to Consider
Powder Coating
Clean, beautiful, Bright White Powder Coating. Inside and outside, the entire booth!
Additional Filters
Don’t get caught off guard! Make sure you have enough filters on hand by ordering extra filters.
Personnel Lifts
We offer Personnel (Man) Lifts for effectively painting large items with enhanced safely.
Drive/Pass Thru Doors
Streamline your production loop. Integrates with existing automated production lines.
Paint Mixing Rooms
Don’t forget a paint mixing room. An important addition to your painting operation.
Ducting Options
Whether it’s a short run, or an entire facility air flow system, we have what you need.
Tri-Fold Doors
3 doors ( 2 on the left, 1 on the right). 2″ tube frame, single skin, with viewing windows
Spray & Cure Heat
Add a heating system to increase quality and and decrease turn around times.
Bi-Fold (Quad) Doors
4 doors (2 left, 2 right) that open out from center. 2″ tube frame, single skin, with windows.
Personnel Lifts
We offer Personnel (Man) Lifts for effectively painting large items with enhanced safely.
LED Lighting Fixtures
We offer many different styles and types of lighting fixtures to offer for your spray paint booth.
Roll-Up Doors
Standard roll-up door with hard vinyl slats. Available in many colors and configurations.
Booth Coat
You’ve spent a lot of money on your spray paint booth, so you should protect it. Clear or White.
RollSeal Roll-Up Doors
A non-rigid alternative to a standard roll-up door. Sizes from 8ft x 8ft to 14ft x 14ft.
Available Options for This Booth Type to Consider
Powder Coating
Clean, beautiful, Bright White Powder Coating. Inside and outside, the entire booth!
Drive/Pass Thru Doors
Streamline your production loop. Integrates with existing automated production lines.
Ducting Options
Whether it’s a short run, or an entire facility air flow system, we have what you need.
Spray & Cure Heat
Add a heating system to increase quality and and decrease turn around times.
LED Lighting Fixtures
We offer many different styles and types of lighting fixtures to offer for your spray paint booth.
Booth Coat
You’ve spent a lot of money on your spray paint booth, so you should protect it. Clear or White.
Additional Filters
Don’t get caught off guard! Make sure you have enough filters on hand by ordering extra filters.
Paint Mixing Rooms
Don’t forget a paint mixing room. An important addition to your painting operation.
Tri-Fold Doors
3 doors ( 2 on the left, 1 on the right). 2″ tube frame, single skin, with viewing windows
Bi-Fold (Quad) Doors
4 doors (2 left, 2 right) that open out from center. 2″ tube frame, single skin, with windows.
Roll-Up Doors
Standard roll-up door with hard vinyl slats. Available in many colors and configurations.
RollSeal Roll-Up Doors
A non-rigid alternative to a standard roll-up door. Sizes from 8ft x 8ft to 14ft x 14ft.
Personnel Lifts
We offer Personnel (Man) Lifts for effectively painting large items with enhanced safely.